Cisco Meraki Z3C 설치 매뉴얼 - 페이지 2

{카테고리_이름} Cisco Meraki Z3C에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Meraki Z3C 6 페이지.
Cisco Meraki Z3C에 대해서도 마찬가지입니다: 설치 매뉴얼 (10 페이지)

페이지 인쇄
Cisco Meraki Z3C 설치 매뉴얼

Ports and Status Indicators

The Z3C uses a single LED to inform the user of the device's status.
LED Status
Solid orange
Rainbow Colors
Flashing White
Solid White
Solid Purple
The Z3C Back Panel
Additional functions on the back panel are described below, from left to right.
SIM Card Slot
Reset button
USB port
Meaning
Power is applied but the appliance is not connected to the Meraki
Dashboard
The appliance is attempting to connect to Meraki Dashboard
Firmware upgrade in progress
Fully operational/connected, uplink actively using wired WAN
Fully operational/connected, uplink actively using cellular failover
Active,
supported
SIM cards can be inserted into this slot to enable cellular
capabilities. Uses nano SIM card (4FF size).
Insert a paper clip if a reset is required.
•
Press for 1 second to delete a downloaded configuration and reboot.
•
Press and hold for more than 10 seconds to force a full factory reset.
USB 3.0 for 3G/4G wireless cards. Traffic status is indicated by the USB
LED.
2