Cisco RFGW-10 빠른 시작 매뉴얼 - 페이지 12

{카테고리_이름} Cisco RFGW-10에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco RFGW-10 41 페이지. Cisco systems rf gateway quick start guide

Warning

To prevent bodily injury when mounting or servicing this unit in a rack, you must take special precautions to ensure

that the system remains stable. The following guidelines are provided to ensure your safety:

- This unit should be mounted at the bottom of the rack if it is the only unit in the rack.

- When mounting this unit in a partially filled rack, load the rack from the bottom to the top with the heaviest

component at the bottom of the rack.

- If the rack is provided with stabilizing devices, install the stabilizers before mounting or servicing the unit in the

rack. Statement 1006

To install the chassis in the rack, complete the following steps:

On the chassis, ensure that all the screw fasteners on the installed components are securely tightened.

Step 1

Ensure that your path to the rack is unobstructed. If the rack is on wheels, ensure that the brakes are engaged or that

Step 2

the rack is otherwise stabilized. See the section on the types of racks you can use to install the chassis.

Step 3

(Optional) Install the chassis installation brackets into the rack to help support the chassis during installation. If you

use the brackets, this will help support the chassis while you secure it to the rack.

Figure 7

Chassis Installation Bracket

Chassis

installation

bracket

With two people, lift the chassis (partially unloaded) into position between the rack posts and rest it on the chassis

Step 4

installation bracket.