Cisco S395 하드웨어 설치 매뉴얼 - 페이지 8
{카테고리_이름} Cisco S395에 대한 하드웨어 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco S395 50 페이지. Web security appliance
Cisco S395에 대해서도 마찬가지입니다: 시작하기 매뉴얼 (18 페이지), 매뉴얼 (24 페이지)
페이지 인쇄
Package Contents
Package Contents
The following figure shows the package contents for the WSA S195, S395, S695, and S695F. Note that the
contents are subject to change and your exact contents might contain additional or fewer items.
Figure 3: Package Contents
1
3
5
Serial Number Locations
The serial number (SN) for the WSA S195, S395, S695, and S695F is printed on the pullout asset card located
on the front panel as shown in the following figure.
Cisco Web Security Appliance S195, S395, S695, and S695F Hardware Installation Guide
4
Chassis
Cisco rail kit (Cisco part number 800-43376-02)
Useful Links document
The steps in the Useful Links document send you
to the documentation you need to install, set up,
and configure your WSA appliance.
2
RJ-45 to DB9-RS232 console cable (Cisco part
number 72-3383-XX)
4
RJ-45 to RJ-45 Cat 5 Ethernet cable, yellow six
feet long (Cisco part number 72-1482-XX)
Two 1-Gb or 10-Gb SFP+ fiber optic transceivers
6
with cables
Note
Supported on the S695F. You cannot
mix SFP transceiver types in the same
chassis. You can either have two 1-Gb
or two 10-Gb SFPs in the same
chassis.
Overview