Cisco S695 매뉴얼 - 페이지 14

{카테고리_이름} Cisco S695에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco S695 24 페이지. Web security appliance
Cisco S695에 대해서도 마찬가지입니다: 시작하기 매뉴얼 (18 페이지), 하드웨어 설치 매뉴얼 (50 페이지)

페이지 인쇄

Rear Panel LEDs

The following figure shows the rear panel LEDs of the WSA S195 and describes their states. The S395 is the

same except it has two power supplies. The S695 and S695F have the same LEDs except that these models

have more data interfaces; the speed and status LED descriptions are the same.

Figure 13: S195 and S395 Rear Panel LEDs and Their States

Overview

Data interface (DATA 2)

Serial console port (

RJ-45 connector that directly connects a

management computer to the appliance.

Interface link speed:

• Off—Link speed is 100 Mbps.

• Amber—Link speed is 1 Gbps.

• Green—Link speed is 10 Gbps.

Data interface link speed:

• Off—Link speed is 10 Mbps.

• Amber—Link speed is 100 Mbps.

• Green—Link speed is 1 Gbps.

RPC port (RPC)

Use for remote power cycling.

Unit identification button

Interface link status:

• Off—No link is present.

• Green—Link is active.

• Green, flashing—Traffic is present on the

active link.

Data interface link status:

• Off—No link is present.

• Green—Link is active.

• Green, flashing—Traffic is present on the

active link.

Overview