Cisco SM-X-24FXS/4FXO 하드웨어 설치 매뉴얼 - 페이지 35

{카테고리_이름} Cisco SM-X-24FXS/4FXO에 대한 하드웨어 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco SM-X-24FXS/4FXO 40 페이지. Voice gateway

Cisco SM-X-24FXS/4FXO 하드웨어 설치 매뉴얼
Cable Specifications and Information
This appendix provides the connector and pinout information you need for making or purchasing cables used
with Cisco VG400 Voice Gateway. To order cables from Cisco, see the Obtaining Technical Assistance
section. This appendix contains the following sections:
Console and Auxiliary Port Cables and Pinouts
Your Cisco VG400 Voice Gateway comes with the cable and adapters you need to connect a PC, an ASCII
terminal, or a modem to your Cisco VG400 Voice Gateway. The cable kit includes:
• RJ-45-to-RJ-45 rollover cable
• RJ-45-to-DB-9 adapter cable for console connection
• RJ-45-to-DB-25 adapter cable for modem connection
The following illustrations and tables provide cable pinout information:
• Console port to a PC—See Table A-1 and A-4
• Console port to an ASCII terminal—See Table A-2 and Table A-4
• Auxiliary port to a modem—See Table A-3 and Table A-4
The console port is configured as data communications equipment (DCE); the auxiliary port is configured as
data terminal equipment (DTE). Both are asynchronous serial ports and use RJ-45 connectors.
Console Port to PC
Figure A-1 shows the RJ-45-to-RJ-45 rollover cable assembly and the RJ-45-to-DB-9 female DTE adapter
(labeled TERMINAL); Table A-1 lists the pinouts.
Console and Auxiliary Port Cables and Pinouts, on page 33
Gigabit Ethernet Port Pinouts (RJ-45), on page 36
Analog Voice Multiport Pinouts (RJ-11X/CA21A), on page 37
A P P E N D I X
Cisco VG400 Voice Gateway Hardware Installation Guide
A
33