Cisco SM-X-8FXS/12FXO 하드웨어 설치 매뉴얼 - 페이지 25
{카테고리_이름} Cisco SM-X-8FXS/12FXO에 대한 하드웨어 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco SM-X-8FXS/12FXO 40 페이지. Voice gateway
페이지 인쇄
- 1. Table of Contents
- 2. Location and Mounting Requirements
- 3. Temperature Control and Ventilation
- 4. Rack Requirements
- 5. Access to Chassis
- 6. Power Source and Supply
- 7. Network Cabling Considerations
- 8. Interference Considerations
- 9. Required Tools and Equipment for Installation
- 10. Site Log
- 11. Installation Checklist
Installing the Cisco VG400 Voice Gateway
3
3. Use the screws provided with the rack to install the chassis in the rack. For both the 19-inch EIA brackets
and the 23-inch SBC brackets, start the lower pair of screws first, and rest the brackets on the lower screws
while you insert the upper pair of screws.
Tip
The screw slots in the brackets are spaced to line up with every second pair of screw holes in the rack. When
the correct screw holes are used, the small, threaded holes in the brackets line up with unused screw holes in
the rack. If the small holes do not line up with the rack holes, you must raise or lower the brackets to the next
rack hole.
The following image shows a typical installation with back mounting
Figure 5: Bracket Installation for Back Mounting
1
19-inch EIA brackets
4
Mounting Screws (4)
Cisco VG400 Voice Gateway Hardware Installation Guide
Mount Cisco VG400 Voice Gateway Chassis in Rack
19-inch EIA brackets
23