Cisco SPA232D 빠른 시작 매뉴얼 - 페이지 13

{카테고리_이름} Cisco SPA232D에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco SPA232D 17 페이지. Ip dect handset
Cisco SPA232D에 대해서도 마찬가지입니다: 사용자 설명서 (10 페이지)

To mount the unit to the wall:

Determine where you want to mount the unit. Verify that the surface

TEP

is smooth, flat, dry, and sturdy.

Drill two pilot holes into the surface 58 mm apart (about 2.28 in.).

TEP

Make sure that the holes are at the same height above the floor so

that the unit is level and secure in either of its two safety-certified

orientations.

Insert a screw into each hole, leaving a gap of 5 mm (0. 1 968 in.)

TEP

between the underside of each screw head and the surface of the

wall.

Place the unit wall-mount slots over the screws and slide the unit

TEP

down until the screws fit snugly into the wall-mount slots.

Cisco SPA232D Quick Start Guide