Epson Perfection V370 Photo 빠른 시작 매뉴얼 - 페이지 2

{카테고리_이름} Epson Perfection V370 Photo에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson Perfection V370 Photo 5 페이지. Placing film or slides
Epson Perfection V370 Photo에 대해서도 마찬가지입니다: 설정 매뉴얼 (2 페이지), 적합성 선언 (4 페이지), 여기에서 시작 (2 페이지), 범위 매뉴얼 (7 페이지), 여기에서 시작 (2 페이지), 여기에서 시작 (2 페이지), 여기에서 시작 (2 페이지), 여기에서 시작 (2 페이지)

To place slides for scanning, see Placing Slides in the Holder.

To replace the document mat, see Replacing the Document Mat.

Placing Film in the Holder

Open the cover of the 35 mm film strip holder.

Slide your film strip all the way into the film holder with the shiny base side facing down. Your images and

any wording on the film strip should appear backwards on the side that faces up.

Note:

Hold the edge of the film gently or use gloves to touch the film; otherwise you may damage the

film.

Make sure the white stickers on the back of the film holder and the areas around them are not

scratched, dusty, or covered in any way. If the areas are obscured, the scanner may have trouble

recognizing your film in Full Auto Mode.

Do not cover the small holes in the film holder.

Close the cover and press it down until you hear a click. Then press down on all the edges of

the cover to secure it.