Cisco VG202 소프트웨어 구성 매뉴얼 - 페이지 33

{카테고리_이름} Cisco VG202에 대한 소프트웨어 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco VG202 50 페이지. Voice gateways
Cisco VG202에 대해서도 마찬가지입니다: 하드웨어 설치 매뉴얼 (50 페이지), 매뉴얼 (10 페이지), 하드웨어 설치 매뉴얼 (48 페이지), 빠른 시작 매뉴얼 (19 페이지)

페이지 인쇄
Cisco VG202 소프트웨어 구성 매뉴얼
Chapter 4
Configuring Voice
Command or Action
Step 9
ccm-manager config server tftp_ip_address
Example:
VG(config)# ccm-manager config server tftp
9.13.38.245
Step 10
ccm-manager sccp
Example:
VG(config)# ccm-manager C
Step 11
exit
Example:
VG(config-line)# exit

Configuring the Voice Interface for Cisco CallManager

To configure voice ports to a Cisco Unified Communications Manager server and set various
parameters—including IP address, port number, and version number, use the following commands.
The following steps are required only when the voice interface is configured manually and not through
Note
auto-configuration.
SUMMARY STEPS
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
OL-16191-01
enable
configure terminal
stcapp ccm-group group-id
stcapp
stcapp feature access-code
stcapp feature speed-dial
voice-port slot-number/port
timeouts initial seconds
timeouts interdigit seconds
timeouts ringing seconds infinity
voice-port slot-number/port
ccm-manager fax protocol [protocol cisco]
ccm-manager config [server] ip-address name seconds
ccm-manager sccp local interface-type interface-number
ccm-manager sccp
sccp local interface-type interface-number port port-type
Cisco VG202 and Cisco VG204 Voice Gateways Software Configuration Guide
Configuring the Voice Interface for Cisco CallManager
Purpose
Specifies the TFTP server from which the voice gateway
downloads Cisco CallManager XML configuration files
and enables the download of the configuration port
port-number.
Enables Cisco CallManager autoconfiguration of the
Cisco IOS gateway.
Exits to global configuration mode.
4-7