DigiVac Bullseye Precision Gauge Piezo 사용자 설명서 - 페이지 4

{카테고리_이름} DigiVac Bullseye Precision Gauge Piezo에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DigiVac Bullseye Precision Gauge Piezo 20 페이지.

While this vacuum instrument has many features, it is very simple to use. Start by unpacking

the unit to verify you've received everything you've ordered.

• Vacuum instrument with white backlight and purple rubber boot

• Attached: 7' sensor cable with keyed connector designed to thread directly into the

sensor

• Piezo vacuum sensor and PTFE hose adapter

• Quick Start guide or (this) user manual

• Remove protective boot

• Remove the battery cover and install 4 AA batteries or attach a Micro-B USB

• Plumb Piezo vacuum sensor into the system to be measured, taking care to

differentiate between the threaded end and the end connecting the sensor to the cable

• Thread sensor cable into sensor (cable connector is keyed)

• Power on the device by pressing the PWR/EXIT button. It will take about 5 seconds to

fully power up and for the reading to settle.

• If need be, turn on the backlight. The backlight does not affect gauge reading or

accuracy.

• Read vacuum!