DigiVac 200 Series 사용 설명서 - 페이지 9
{카테고리_이름} DigiVac 200 Series에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DigiVac 200 Series 10 페이지. Wide range thermocouple vacuum gauges and controllers
페이지 인쇄
Gnd Ground for outputs.
(connect to pin 5 of a 9 pin D-sub for Rs-232)
Txd
RS-232 transmit (connect to pin 2 of a 9 pin D-sub
Nc
Normally closed Relay contact
Com Common Relay contact.
X
No Connection
G
Green wire to gauge tube(usually signal -)
R
Red wire to gauge tube (usually signal +)
B
Black wire to gauge tube (usually exitation +)
W
White wire to gauge tube (usually exitation -)
11.0 DIGIVAC RECORDER
Digivac offers a special vacuum recorder
which displays from Atmosphere to hard
vacuum. Both the plot and the numbers
are displayed. This recorder is often used
by rebuilders to document the
performance of vacuum pumps but have
many other uses. They are priced at under
$400.00 and are available from stock.
Contact Digivac Company for further
information
.
12.0
CUSTOM FEATURES AND PROGRAMMING
Because these gauges are microprocessor controlled, it is possible to provide custom
control features at surprisingly reasonable prices. The software is "burned" into the
microprocessors, which are socketed and easily replaced by a user. Contact the Digivac
Company to discuss your needs.
If the gauge is to be used in a neon sign processing facility, it must be installed with a
stopcock or a solenoid valve to protect it from exposure to the system and possible damage
during high voltage bombarding. Battery operated gauges are also offered and are
particularly suited to neon applications.
SPECIAL REQUIREMENTS
It is the policy of the Digivac Company to customize instruments for specialized
requirements whenever it is economically feasible to do so. We encourage inquiries about
your special needs.
For repair or recalibration, return gauges to:
The Digivac Company
1020 Campus Drive
Morganville NJ 07751
www.digivac.com
(732) 765-0900
(732) 765-1800 FAX
9