Epson PowerLite 1260 설치 핸드북 - 페이지 2

{카테고리_이름} Epson PowerLite 1260에 대한 설치 핸드북을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson PowerLite 1260 3 페이지. Multimedia projector
Epson PowerLite 1260에 대해서도 마찬가지입니다: 브로셔 (2 페이지), 빠른 설정 (4 페이지), 적합성 선언 (4 페이지), 사용자 설명서 (1 페이지), 브로셔 (4 페이지)

페이지 인쇄

Epson PowerLite 1220 / 1260

note

The lamp(s) in this

product contain mercury.

Please consult your state and

local regulations regarding

disposal or recycling. Do not

put in the trash.

4. Loosen the two screws holding the lamp in place (you can't

remove them).

5. Hold the lamp as shown and pull it straight out.

6. Gently insert the new lamp. (If it doesn't fit easily, make sure it is

facing the right way.) Then tighten its screws.

7. Replace the lamp cover, then tighten its screw.

8. Reset the lamp timer as described in the next section.

INSTALLATION HANDBOOK

Loosen, but don't

remove these screws

Maintenance

note

Tighten the lamp cover

securely so you do not receive

a lamp cover error when you

turn the projector back on.