Epson ProofPlus TM-H6000III 사용자 설명서 - 페이지 14

{카테고리_이름} Epson ProofPlus TM-H6000III에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson ProofPlus TM-H6000III 29 페이지. Ecc printer
Epson ProofPlus TM-H6000III에 대해서도 마찬가지입니다: 제품 설명서 (27 페이지), 브로셔 (2 페이지), 사양 (2 페이지), 브로셔 (6 페이지), 사용자 설명서 (32 페이지), 개발 매뉴얼 (26 페이지), 개발 매뉴얼 (45 페이지), 개발 매뉴얼 (32 페이지), 매뉴얼 (10 페이지)

페이지 인쇄

English

Cleaning the Slip Image Scanner

See illustration H.

The glass part of the scanner (indicated by the arrows in the illustration) may

become dirty due to ink or paper dust, which can decrease the image quality. To

avoid this, clean the glass part every 12 months.

Open the unit cover.

Inside the printer, push the levers backward to open the unit.

Wipe the glass gently with a soft, dry cloth.

Note:

When cleaning the scanner glass, do not use any liquid, such as detergent, benzine, or

water.

Liquids can reach the back of the scanner glass and cause it to become dirty. If the scanner

glass has foreign matter that is hard to remove, such as oil or grease, you can wet a cloth a

little with alcohol and wipe the scanner glass, but never put any liquid directly on the

scanner glass.

Troubleshooting

ERROR LED is on or flashing.

❏

The print head temperature may be extremely high. Wait until the print head

cools and the printer resumes printing automatically.

❏

Make sure that the roll paper and unit cover are properly closed.

❏

Turn off the printer, and check for a paper jam.

❏

The autocutter may be jammed. See the description below.

❏

Turn off the power, wait several seconds, and then turn it on again. If the

error remains, contact your qualified service person.

The autocutter is jammed or the roll paper cover will not open.

Turn off the printer, and open the unit cover.

Then turn the knob (A) until you see a pin (B) in the opening. See

illustration I.

8 TM-H6000III User's Manual