Epson Stylus CX6000 Series 매뉴얼 - 페이지 18

{카테고리_이름} Epson Stylus CX6000 Series에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson Stylus CX6000 Series 19 페이지. Ink cartridge for use with stylus cx5000; cx6000; cx7400; cx8400; cx9400f; cx9475f printers;
Epson Stylus CX6000 Series에 대해서도 마찬가지입니다: 여기에서 시작하기 매뉴얼 (8 페이지), 업데이트 (1 페이지), 매뉴얼 (4 페이지)

페이지 인쇄

Epson Stylus CX6000 Series

Transporting the CX6000 Series

If you need to ship your CX6000 Series, you must prepare it

for transportation by packing it in its original box or one of a

similar size.

1. Turn off the CX6000 Series.

2. Remove any paper from the sheet feeder and close the paper

support.

3. Unplug the power cord from the electrical outlet. Then

disconnect the USB cable from the CX6000 Series.

4. Open the scanner section and make sure the ink cartridge

holder is in the home position on the right.

5. Secure the ink cartridge holder (print head) to the case with

tape.

Caution:

Be sure to remove the tape after installing the printer in its new

location, but before you turn it on.

6. Close the scanner section, push in the output tray extension,

and close the output tray.

7. Repack the CX6000 Series in the original box using the

protective materials that came with it.

Keep the CX6000 Series level as you transport it.

After transporting the CX6000 Series, remove the tape

securing the print head, plug in the CX6000 Series, and turn

it on. If you notice a decline in print quality, clean the print

head (see page 14); if output is misaligned, align the print

head (see page 17).

Epson Stylus CX6000 Series 매뉴얼 - 페이지 18

Related Documentation