Argos Malvern 604/0105 조립 지침 매뉴얼 - 페이지 8

{카테고리_이름} Argos Malvern 604/0105에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Argos Malvern 604/0105 9 페이지. 3 door display cabinet

페이지 인쇄

Assembly Instructions

Step 4

Fixing to wall

It is recommended that

the unit is ﬁ xed to a wall

Fix wall strap

to the

back of the unit using

15mm screw

and

15mm washer

Warning: The

15mm screw

is for ﬁ xing the

wall strap

to furniture

only. In addition to this

you will need to choose

a screw or ﬁ tting which is

suitable for securing the

wall strap

to the type

of walls you have. If you

are unsure about what

type of screw to use seek

professional help.

Step 5

Adjusting doors

1. To adjust the height /

level of the door loosen

all screw 'A's on all hinge

plates, level the door

height and retighten all

screw 'A's.

2. To adjust the gap

between the doors

loosen screw 'B', then

turn screw 'C' clockwise

to close the gap or

anticlockwise to increase

the gap. Re-tighten

screw 'B' to lock position.

3. To adjust the distance

away from the unit

loosen screw 'B', this

allows the hinge arm

to slide back and forth.

Adjust as required then

re-tighten screw 'B'.

Assembly is complete.

Back Panel

Unit Top

Using the correct type of

screw, screw through the

washer and wall strap

into a pre-drilled hole in

the wall