Epson Stylus CX7400 서비스 매뉴얼 - 페이지 16
{카테고리_이름} Epson Stylus CX7400에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson Stylus CX7400 20 페이지. Ink cartridge for use with stylus cx5000; cx6000; cx7400; cx8400; cx9400f; cx9475f printers;
Epson Stylus CX7400에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (8 페이지), 사용자 설명서 (12 페이지), 빠른 매뉴얼 (48 페이지), 업데이트 (1 페이지), 매뉴얼 (4 페이지)
페이지 인쇄
EPSON Stylus CX7300/CX7400/DX7400/CX8300/CX8400/DX8400
1.4 General Specifications
1.4.1 Electrical Specifications
Table 1-10. Primary Power Specifications
Item
Rated power supply voltage
Input voltage range
Rated current (Max. rated current)
Rated frequency
Input frequency range
Insulation resistance
Energy conservation
Printing
(ISO10561 Letter Pattern)
Power
Low-power mode
consumption
Sleep mode
Standby mode
(power-off)
Note 1: If the printer or scanner is not operated for more than three minutes, the printer goes
into the power save mode within two minutes.
2: When no operation is made with the control panel for more than 13 minutes, the panel
goes to the power save mode within two minutes.
PRODUCT DESCRIPTION
100-120 V model
220-240 V model
100 to 120 VAC
220 to 240 VAC
90 to 132 VAC
198 to 264 VAC
T.B.D.
A
(T.B.D.
A)
T.B.D.
A
(T.B.D.
50 to 60 Hz
49.5 to 60.5 Hz
3000 V (for one minute)
International Energy Star Program compliant
T.B.D.
W
T.B.D.
W
T.B.D.
W
T.B.D.
W
T.B.D.
W
T.B.D.
W
T.B.D.
W
T.B.D.
W
General Specifications
1.4.2 Environmental Conditions
Table 1-11. Environmental Conditions
Condition
Temperature
10 to 35°C
Operating
(50 to 95°F)
Storage
-20 to 40°C*
(unpacked)
(-4°F to 104°F)
Note *1 : The combined Temperature and Humidity conditions must be within the blue-shaded
A)
Fig.1-4
range in
.
*2 : No condensation
*3 : Must be less than 1 month at 40°C.
Humidity (%)
Figure 1-4. Temperature/Humidity Range
When returning the repaired printer to the customer, make sure
the Printhead is covered with the cap and the ink cartridge is
installed.
If the Printhead is not covered with the cap when the printer is
off, turn on the printer with the ink cartridge installed, make
sure the Printhead is covered with the cap, and then turn the
printer off.
*1
*1,2
Humidity
Shock
1G
20 to 80%
(1 msec or less)
3
2G
5 to 85%
(2 msec or less)
90
80
70
60
50
40
30
20
27/80
10/50
20/68
30/86
35/95
Temperature (°C/°F)
Revision A
Vibration
0.15G,
10 to 55Hz
0.50G,
10 to 55Hz
40/104
16