Epson Stylus CX7400 빠른 매뉴얼 - 페이지 35
{카테고리_이름} Epson Stylus CX7400에 대한 빠른 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson Stylus CX7400 48 페이지. Ink cartridge for use with stylus cx5000; cx6000; cx7400; cx8400; cx9400f; cx9475f printers;
Epson Stylus CX7400에 대해서도 마찬가지입니다: 서비스 매뉴얼 (20 페이지), 빠른 시작 매뉴얼 (8 페이지), 사용자 설명서 (12 페이지), 업데이트 (1 페이지), 매뉴얼 (4 페이지)
Error Indicators
Light status
b paper light on
b paper light flashing
B ink light flashing
B ink light on
b paper light flashing
Copies window
b paper light flashing
Copies window
b paper light flashing
Copies window
b paper light flashing
Copies window
b paper light flashing
Copies window
Problem and Solution
Paper is out or multiple pages have fed. Load or reload
paper in the sheet feeder, then press one of the x Start
buttons to continue.
Paper is jammed. Carefully remove the jam, as described
on page 37.
One or more cartridges have low ink. You can continue
printing until a cartridge needs replacement. Check the
cartridge status to determine which cartridges are
affected (see page 28).
One or more ink cartridges are expended or incorrectly
installed. If an ink cartridge is expended, you must replace
the cartridge to be able to print. If you just replaced a
cartridge and the light is still on, the cartridge is not
installed correctly. Press the y Stop button to move the
cartridges to the replacement position. Press down on all
the installed cartridges, then press the y Stop button to
continue.
The inserted memory card is not supported or does not
contain compatible photos. Remove it and insert another
card (see page 14).
The index sheet is not positioned correctly or is not
marked correctly. Check the marks on the sheet, position
it correctly, and print it again (see page 16).
The index sheet is not marked correctly. Check the marks
on the sheet, position it correctly, and print it again (see
page 16).
The index sheet you're printing from does not match the
photos on the inserted memory card. Replace the card or
the sheet and try again (see page 16).
The connected USB hub is not supported. Disconnect the
hub.
Error Indicators
35