Epson Stylus Photo RX600
Copy Layout setting
Mirror
Copies a mirror image of your
photo onto transfer paper so
that you can iron it onto a
shirt or other cloth article
Wallet Photo
Prints nine wallet-size copies
of the photo on the page
* BorderFree is available only on selected Epson photo papers.
** If you notice reduced print quality at the bottom of your copy, try using the
Standard setting.
3. After you choose your copy layout, press
Lightening or Darkening Copies
1. Press the
button to display the
Menu
2. Press the d button to choose
3. Press the l button to lighten or the r button to darken
your copies.
4. Press the
button to go back to the additional copy
OK
settings.
Restoring Color as You Copy
You can bring an old 4 × 6-inch photo back to life as you copy
it onto Premium Glossy Photo paper.
1. Press the
button to display the
Menu
RX600 screen.
2. Choose
with the u and d buttons and use
Copy Layout
the l and r buttons to select
3. Press the
button. You see a layout screen.
OK
4. Press the
button again. You see the Multi-Photo menu.
OK
5. Press the d button to choose
6. Press the l button to choose
and size are selected automatically.
7. Press the x
button and follow the instructions on the
Color
RX600 screen to copy and restore your photo.
Note:
To restore the color in an old film strip photo or slide and copy or scan
them, see the User's Guide.
Epson Stylus Photo RX600
8 -
Result
.
OK
.
Copy Menu
.
Copy Density
on the
Copy Menu
.
Multi-Photo
.
Restoration
. Your photo paper type
On
Saving and Reusing Copy Settings
Follow these steps to save a set of custom copy settings so you
can quickly reuse it for a similar copying job.
1. After selecting settings, press and hold the
until you see
The current setting has been saved
LCD screen. Then press
If you want to save a different group of settings, repeat
step 1. This replaces your previously saved settings.
2. To use your saved settings, press the
you see
Recalled
Canceling Copies
To cancel a job in progress, press the y
appears on the LCD screen and your page is
Canceling
ejected.
Restoring Default Settings
If you want to reset copy and print settings to their original
default settings, follow these steps:
1. Press the
button.
Setup
2. Use the u and d buttons to choose
.
Settings
3. Press
, then press
OK
4. You see a confirmation message that settings have been
restored. Press
OK
Viewing Photos from a Memory Card
After you've inserted your memory card, you can view your
photos on the RX600 screen.
Note:
You can also print an index sheet containing small thumbnail images
of the pictures on your memory card. See page 9 for instructions.
1. Press the
Memory Card
2. Use the u and d buttons to highlight
3. Use the l and r buttons to choose
2/04
Recall
.
OK
button until
Recall
on the LCD screen. Then press
button.
Stop
Restore to Factory
again to restore your settings.
OK
.
button.
Custom Print
Select Print
button
on the
.
OK
.
.
페이지 인쇄