Digiway P750 사용 설명서 - 페이지 13

{카테고리_이름} Digiway P750에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Digiway P750 15 페이지. Sliding gate motor
Digiway P750에 대해서도 마찬가지입니다: 사용 설명서 (16 페이지)

9. Manual release

A: What to do during a power failure:

The gate can be manually pushed open and close if there is no power. To do this, you need to release

the release bolt.

(1) Open the front door and turn the switch (circuit breaker) OFF (even though there is no power)

(2) Fit spanner (provided) onto the manual release bolt nicely.

(3) Turn the spanner anti-clockwise 1 turn. Take the spanner off the manual release bolts. The

gate can now be manually opened and closed. DO NOT TURN THEBOLT MORE THAN

ONE TURN, OTHERWISE OIL COME OUT

(4) After the gate was pushed to the required position, fit the spanner onto the manual release

blots, clockwise turn and make the bolts tight, otherwise maybe cause oil leaking.

B: What to do if power is reconnected:

(1) Make sure the switch (circuit breaker) is still OFF.

(2) Fit the spanner onto the bolt nicely and clockwise turn the manual release blots and make sure

the bolt is tight

(3) Turn on the switch on, the gate should start to close if no signal input on PEB (safety) and

OPN (open) inputs

(4) When gate hit on receiving post, the controller will recall the all the settings and ready to

operate.

P750V5.0 industrial gate motor manual

MANUAL RELEASE