DIGIWEB Fritz!Box 4040 빠른 시작 매뉴얼 - 페이지 15
{카테고리_이름} DIGIWEB Fritz!Box 4040에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DIGIWEB Fritz!Box 4040 20 페이지. Digiweb electric broadband
페이지 인쇄
Fritz!Box Troubleshooting
LED Operation for Fritz!Box 4040
Power
Internet
WLAN
LAN
Info
LED Operation for Fritz!Box 7560
Power / DSL
Fon
(VOIP Phone Service)
DECT
WLAN
Info
Flashing: Start-up in process.
Please allow up to 2 minutes to complete.
On (Solid): Start-up completed.
Off: No connection established with the SIRO ONT. Please check that
the Ethernet cable from WAN port on Fritz!Box to LAN port on SIRO
ONT is securely connected. Where necessary, try using an alternative
Ethernet cable.
On (Solid): Connection established with the SIRO ONT.
Off: Wireless WiFi disabled. Please press Fritz!Box WLAN button.
Flashing: Adopting the Wireless / WiFi settings.
On (Solid): Wireless / WiFi is active.
Off: No device connected via Ethernet cable to Fritz!Box LAN ports.
On: One or more devices connected via Ethernet cable to the
Fritz!Box LAN ports.
Flashing: Configuring / Configurable e.g. firmware update.
DO NOT POWER OFF when this LED is flashing!
Red: Configuration error – please power off and on the Fritz!Box.
Flashing: Start-up in process.
Please allow up to 2 minutes to complete.
On (Solid): Start-up completed.
Off: Digiweb VoIP Phone service is not configured.
Please power off Fritz!Box, then power back on, allow up to 5 minutes
to configure.
Flashing: You have new messages in your Fritz!Box voicemail inbox.
On (Solid): A telephone connection on your Digiweb VoIP service
is active.
Off: DECT Phone not connected. On (Solid): DECT Phone connected.
Off: Wireless WiFi disabled. Please press Fritz!Box WLAN button.
Flashing: Adopting the Wireless / WiFi settings
On (Solid): Wireless / WiFi are active. Please refer to Step 7.
Flashing: Configuring / Configurable e.g. firmware update.
DO NOT POWER OFF when this LED is flashing!
Red: Configuration error – please power off and on the Fritz!Box.
15