Digizoid ZO 사용자 설명서

{카테고리_이름} Digizoid ZO에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Digizoid ZO 4 페이지. Personal subwoofer
Digizoid ZO에 대해서도 마찬가지입니다: 제품 설명서 (13 페이지), 스마트 시작 매뉴얼 (6 페이지)

페이지 인쇄

Know your

Output Jack

Charge Status

Indicator

USB Charging Port

Neutralize the Source

When initially connecting your ZO to any audio source, you must start

with neutral source equalizer settings as indicated below...

For portable media devices, turn oﬀ all built-in equalizer settings which are

typically found in the device's main menu.

For computers, turn oﬀ all software-related equalizers, which are normally

accessed through the audio player's main menu. If it is accessible, turn oﬀ

any equalizer functions which may be associated with the computer's sound

card.

When connecting to a car stereo, set the bass the treble to its neutral setting

(between min and max).

If you are connecting ZO through an aftermarket car stereo, turn oﬀ all sound

eﬀect functions and set the equalizer to the "ﬂat" preset.

Be sure to turn the volume of your source down to about 25% before using the

ZO! If using Line-out, be sure to turn the volume of the ZO all the way down,

and do not use standby mode.

Input Jack

SmartVektor

Controller (SVC)

™

Turns ZO on/oﬀ, triggers standby

mode, controls sound contouring

and volume level adjustments

LightScale Display

Colored LED displays the

selected contour & volume

levels, and secondary LED

blinks when battery is low

Pg 1

digiZoid.com