Epson 7800 - Stylus Pro Color Inkjet Printer 포장 풀기 및 설정 매뉴얼 - 페이지 7

{카테고리_이름} Epson 7800 - Stylus Pro Color Inkjet Printer에 대한 포장 풀기 및 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson 7800 - Stylus Pro Color Inkjet Printer 27 페이지. Stylus pro 800 series
Epson 7800 - Stylus Pro Color Inkjet Printer에 대해서도 마찬가지입니다: 브로셔 및 사양 (8 페이지), 사양 (4 페이지), 시작하기 매뉴얼 (10 페이지), 사용자 설명서 (11 페이지), 빠른 참조 매뉴얼 (12 페이지), 보충 설명서 (1 페이지), 제한 보증 (12 페이지), 브로셔 및 사양 (8 페이지), 제품 지원 게시판 (10 페이지), 브로셔 및 사양 (16 페이지), 공지 사항 시트 (4 페이지)

Tools:

Hex wrench

Hex socket head bolts (4)

Wing nuts, spring washers, and washers(2)

H is for connecting the printer unit to the base unit.

Paper feed support films (5)

Assembling the base unit

Caution:

Have two people working on either side to

assemble the base unit (20.5 kg).

1. Hold base upright left (A) and a horizontal

strut as shown. Then fix the strut to the base

using the two hex socket head bolts (G) with

the hex wrench (F).

Note:

❏ An instruction sticker about the setting paper

basket is attached to the front of a base upright

right.

❏ Do not fasten the screws too tight. Leave a

room to adjust the position when you fasten

the screw on the other base upright.

2. Referring to step 1, secure the other side of the

strut to the base (B).

3. Fasten four screws on the both sides of the

base upright securely.

This completes assembly of the base unit. Before

attaching the paper basket, mount the printer on

the base unit.

Unpacking the printer

Caution:

The printer unit is heavy and unwieldy. Have

two people unpack the printer unit, and four

people place the printer unit on top of the base

unit.

1. Remove the roll paper spindle with roll paper,

polystyrene foam, and cardboard cushions

from around the printer.