DIGMESA FC-PRO 운영 매뉴얼 - 페이지 11

{카테고리_이름} DIGMESA FC-PRO에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DIGMESA FC-PRO 20 페이지.

10. Alarm function (limit value in the Day counter)

The alarm function is deactivated with 00000.

Select Day counter or Total counter and keep the Mode

button pressed for 5 seconds.

If the unit is protected by a code, you will be requested

to enter this code (Code, Chapter 14).

SYSTEM LED is illuminated.

ALARm is shown on the display.

In Setting mode, if no button is pressed for 30 seconds,

the display goes back to the Day counter.

Press the Mode button once again to switch to the Setting

value.

Then set the required alarm value in litres.

Use the Down/Up buttons to change the value and the

Mode button to switch to the next digit.

For example, a value of 15'000 litres:

Press Mode button 3x, Up button 5x, Mode button 1x,

Up button 1x and then press the Mode button.

ALARm is shown on the display.

Press the Up button once briefly to switch to P/L setting

(pulses per litre, manual). Or press the Mode button for

5 seconds to go back to the Day counter.

FC PRO ENG

Page 11