DIGMESA FC-PRO 운영 매뉴얼 - 페이지 14

{카테고리_이름} DIGMESA FC-PRO에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DIGMESA FC-PRO 20 페이지.

13. CODE

Make a note of the code that is entered, as without it all

the important functions are blocked.

The Code function is deactivated with 0000.

Select Day counter or Total counter and keep the Mode

button pressed for 5 seconds.

If the unit is protected by a code, you will be requested

to enter this code.

SYSTEM LED is illuminated.

ALARm is shown on the display.

In Setting mode, if no button is pressed for 30 seconds,

the display goes back to the Day counter.

Press the Up button 3 times to switch to COdE setting.

COdE appears on the display. Now press the Mode

button once again.

Enter your personal code here. Use the Down/Up buttons

to change the value and the Mode button to switch to

the next digit.

Sample code - 1234:

Press the Up button 4x, Mode button 1x, Up button 3x,

Mode button 1x, Up button 2x, Mode button 1x, Up

button 1x and Mode button 1x.

COdE is shown on the display.

You go back from one setting to the next each time you

press the Down button briefly. Or press the Mode button

for 5 seconds to go back to the Day counter.

FC PRO ENG

Page 14