Epson C81106 Series 매뉴얼 - 페이지 4

{카테고리_이름} Epson C81106 Series에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson C81106 Series 11 페이지. Roll paper holder

Installing the Roll Paper Holder

Follow these steps to install the roll paper holder.

1. Remove the paper support from the printer.

2. Mount the roll paper holder in the slot on the back of the sheet feeder.

Note:

When using roll paper make sure there is sufficient space in front of the printer for paper to eject. If possible,

mount the printer higher than usual and allow the paper to be ejected to the front and down.

Once you start a print job, you cannot clean the print head or replace the ink cartridges until the job

is finished. Before printing, please run a nozzle check to see if you need to clean the print head.

We also recommend that you check the remaining ink levels using the Status Monitor utility

(Windows and Macintosh) to make sure you have enough ink to complete the print job. (See your

printer manual for instructions.)

If the printer runs out of ink while you are printing, you cannot resume printing from that point even

if you replace the empty cartridge. If there is only a small amount of ink remaining in either cartridge,

replace the cartridge(s) before printing. See your printer manual for instructions on replacing

outdated ink cartridges before the black or color ink lights begin flashing.

Loading roll paper

Follow these steps to load roll paper.

Downloaded from:

http://www.usersmanualguide.com/