Epson C823301 사용자 설명서 - 페이지 9

{카테고리_이름} Epson C823301에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson C823301 18 페이지. Epson user's manual fax i/f board c823301

Fax modem mode

If you want to use the fax board to send faxes from your

computer, you need to buy a straight through serial (or

modem) cable and appropriate fax modem software. One

cable is included with your fax board, but you need an

additional cable to connect the board to your computer.

You need a standard straight through (or modem) cable with a

25-pin connector on one end and a 9-pin connector (for the

computer) on the other end or with 25-pin connectors on both

ends, depending on the serial port of your computer. Check

your computer before you buy the cable. When you have the

appropriate serial cable, follow the steps below:

1. Connect the 9-pin connector of the supplied cable to the fax

board.

2. Connect the 25-pin connector of the modem cable to the

25-pin connector of the supplied cable.

3. Connect the 9-pin (or 25-pin) connector of the modem cable

to your computer.

4. Follow the instructions for your fax modem software to

install and use the software.

Where to get help

Epson America provides local customer support and service

through a nationwide network of authorized EPSON dealers

and Service Centers.

EPSON also provides technical assistance with the installation,

configuration, and operation of EPSON products through

EPSON Connection. U.S. users can call (800) 922-8911;

Canadian users can call (800) GO-EPSON.

Setup