Acuity Brands Lighting AAWSC 매뉴얼 - 페이지 11

{카테고리_이름} Acuity Brands Lighting AAWSC에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Acuity Brands Lighting AAWSC 18 페이지.

Installation Instructions

RSX LED

Aim fixture as required and tighten the 7/16-14 SHC knuckle adjustment bolt using an approximately

38 ft-lbs. (See figure 14) For units with photocontrol receptacle, the fixture mounting/aiming angle must be

restricted from 0° to 45° from horizontal per ANSI C136.10-2010.

Energize the luminaire to verify its operation and proper illumination of area.

WARNING: DO NOT MOUNT THE KNUCKLE FITTER TO A TENON OR BRACKET THAT IS MORE

THAN 5 DEGREES FROM VERTICAL. MOUNTING AT AN ANGLE GREATER THAN 5 DEGREES RE-

QUIRES USE OF A PROPERLY TIGHTENED THRU-BOLT AND LOCKNUT. FAILURE TO CORRECTLY

INSTALL COULD RESULT IN SERIOUS INJURY OR DEATH.

Figure 14

Lithonia Lighting Outdoor

One Lithonia Way, Conyers, GA 30012

Phone: 800-279-8041 Fax: 770-918-1209

www.lithonia.com

Part Number: IM-459 Rev A

Revision Date: 8/29/19

Page #9