Epson DLQ-3500 설정 매뉴얼 - 페이지 14

{카테고리_이름} Epson DLQ-3500에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson DLQ-3500 31 페이지. Epson serial impact dot matrix printers
Epson DLQ-3500에 대해서도 마찬가지입니다: 공지 사항 (1 페이지), 빠른 매뉴얼 (32 페이지), 참조 매뉴얼 (34 페이지)

페이지 인쇄

1-4 Connecting the Printer to Your Computer

Your printer includes both an IEEE-1284-compatible parallel

interface and a USB (Universal Serial Bus) interface. Also a Type-B

optional interface slot is provided in case your computer requires

a different type of printer interface. See the Reference Guide for

more information on optional interface cards.

Connect your computer to the desired interface as described

below.

Note:

You can connect a cable to both interfaces; the printer switches

automatically to the appropriate interface when it receives data. Also you

can manually set one of the interfaces as the default in the printer's

Default Setting. Refer to the Reference Guide for more information on

the printer's default settings.

Using the parallel interface

To connect your computer to your printer's built-in parallel

interface, you need a shielded, twisted-pair parallel cable with a

36-pin Centronics

Follow these steps to connect the printer to your computer using

the parallel interface:

1. Make sure both the printer and computer are turned off. The

printer is off when the power switch is pressed down to the

side.

Setting Up the Printer

compatible connector for the printer.