Epson FX-1180 - Impact Printer 설정 매뉴얼 - 페이지 6

{카테고리_이름} Epson FX-1180 - Impact Printer에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson FX-1180 - Impact Printer 33 페이지. Epson serial impact dot matrix printers
Epson FX-1180 - Impact Printer에 대해서도 마찬가지입니다: 브로셔 및 사양 (24 페이지), 제품 정보 (17 페이지), 빠른 참조 매뉴얼 (16 페이지), 매뉴얼 (11 페이지), 사양 (2 페이지), 매뉴얼 (18 페이지), 사양 (2 페이지), 제한 보증 (1 페이지), 참조 매뉴얼 (34 페이지), 빠른 매뉴얼 (33 페이지)

페이지 인쇄

Caution:

There are several models of the printer designed for different

voltages, and it is not possible to adjust the printer for use with

another voltage. If the label on the back of the printer does not

show the correct voltage for your country, contact your dealer.

You must remove all protective materials packed around and

inside your printer before you set it up and turn on the power.

Follow the directions on the Notice Sheet (packed with the

printer) to remove these materials.

Save all packing and protective materials in case you need to ship

the printer in the future. It should always be transported in its

original packing materials.

1-2 Choosing a Place for the Printer

Follow these guidelines when selecting a location for your printer.

Place the printer on a flat, stable surface. The printer will not

operate properly if it is tilted or placed at an angle.

Place the printer where you can easily connect it to a network

interface cable, if necessary.

Leave adequate room around the printer for easy operation

and maintenance.

Avoid using or storing the printer in places subject to rapid

changes in temperature and humidity. Keep it away from

direct sunlight, strong light, heat sources, or excessive

moisture or dust.

Avoid places subject to shocks and vibrations.

Place the printer near a wall outlet where you can easily

unplug the power cord.

Setting Up the Printer