Epson FX-1180 - Impact Printer 빠른 매뉴얼 - 페이지 23

{카테고리_이름} Epson FX-1180 - Impact Printer에 대한 빠른 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson FX-1180 - Impact Printer 33 페이지. Epson serial impact dot matrix printers
Epson FX-1180 - Impact Printer에 대해서도 마찬가지입니다: 설정 매뉴얼 (33 페이지), 브로셔 및 사양 (24 페이지), 제품 정보 (17 페이지), 빠른 참조 매뉴얼 (16 페이지), 매뉴얼 (11 페이지), 사양 (2 페이지), 매뉴얼 (18 페이지), 사양 (2 페이지), 제한 보증 (1 페이지), 참조 매뉴얼 (34 페이지)

페이지 인쇄

Caution:

❏ It is best to load continuous paper

❏ Never feed labels backward using the

❏ Because labels are sensitive to

Temperature

Humidity

❏ Do not leave labels loaded in the

❏ Do not load continuous paper with

❏ Do not load paper that is curled or has

Downloaded from:

http://www.usersmanualguide.com/

with labels on the pull tractor.

Loading labels on the rear or the front

push tractor is not recommended.

Load/Eject or Tear Off/Bin

button. When fed backward, labels

can easily peel off the backing sheet

and cause a paper jam.

temperature and humidity, use them

only under normal operating

conditions described below:

15 to 25°C (59 to 77°F)

30 to 60% RH

printer between jobs; they may curl

around the platen and jam when you

resume printing.

labels from the rear paper slot.

Because the paper path from the rear

slot is curved, labels may come off

their backing sheets inside the printer

and cause a paper jam.

been folded.

EPSON FX-880+/FX-1180+ Quick Guide

Removing continuous paper with labels

To avoid peeling labels off the backing sheet

and jamming the printer, follow these steps

to remove continuous paper with labels

from the printer:

1. Tear off the fresh supply of continuous

labels at the perforation nearest the

paper entry slot.

* perforation nearest the paper entry slot

2. Hold down the LF/FF button to eject the

remaining labels from the printer.

Caution:

Never feed labels backward using the

Load/Eject or Tear Off/Bin button.

When fed backward, labels can easily

come off the backing sheet and cause a

paper jam.

Special Papers (2/3)