Epson FX-2190 제품 정보 매뉴얼 - 페이지 7
{카테고리_이름} Epson FX-2190에 대한 제품 정보 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson FX-2190 19 페이지. Impact printers
Epson FX-2190에 대해서도 마찬가지입니다: 사용자 설명서 (48 페이지), 사양 (2 페이지), 매뉴얼 (11 페이지), 설정 매뉴얼 (2 페이지), 사양 (2 페이지), 빠른 참조 (12 페이지), 여기에서 시작 (2 페이지)
페이지 인쇄
EPSON FX-890/FX-2190
Printable Area
Single sheets
A The minimum top and bottom margins are 0.2 inch (4.2 mm).
B FX-890:
The minimum left and right margins are 0.1 inch (3 mm).
The maximum printable width is 8.0 inches (203.2 mm).
FX-2190:
The minimum left and right margins are 0.1 inch (3 mm).
The maximum printable width is 13.6 inches (345.4 mm). For
paper wider than 8.2 inches (209.2 mm), the side margins
increase to match the width of the paper.
Continuous paper
A The minimum top and bottom margins above and below the
perforation are 0.17 inch (4.2 mm).
B FX-890:
The minimum left and right margins are 0.51 inch (13 mm).
The maximum printable width is 8.0 inches (203.2 mm). For paper
wider than 9.0 inches (229.2 mm), the side margins increase to
match the width of the paper.
FX-2190:
The minimum left and right margins are 0.51 inch (13 mm).
The maximum printable width is 13.9 inches (351.8 mm). For
paper wider than 14.9 inches (377.8 mm), the side margins
increase to match the width of the paper.
6 - EPSON FX-890/FX-2190
Envelopes
Roll paper
Standards and Approvals
120 V (US model)
Safety standards
UL 1950
CSA C22.2 No. 950
EMI
FCC part 15 subpart B class B
CSA C108.8 class B
230 V (European model)
Safety standard
EN 60950
EMI
EN 55022 (CISPR pub. 22) class B
AS/NZS 3548 class B
Universal (UPS) model
Safety standards
UL 1950
CSA C22.2 No. 950
EN 60950
EMI
FCC part 15 subpart B class B
CSA C108.8 class B
EN 55022 (CISPR pub. 22) class B
AS/NZS 3548 class B
6/03
A The minimum top and
bottom margins are
0.17 inch (4.2 mm).
B The minimum left and right
margins are 0.12 inch
(3 mm).
A The minimum top and
bottom margins are
0.17 inch (4.2 mm).
B The minimum left and right
margins are 0.12 inch
(3 mm). The maximum
printable width is
8.0 inches (203.2 mm).