Acuity Brands Lighting Pedestrian LED Luminaire Series 설치 및 유지 관리 매뉴얼 - 페이지 3
{카테고리_이름} Acuity Brands Lighting Pedestrian LED Luminaire Series에 대한 설치 및 유지 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Acuity Brands Lighting Pedestrian LED Luminaire Series 5 페이지.
페이지 인쇄HOLOPHANE
AFTER INSTALLATION DELIVER THIS MANUAL TO OWNER
1 INTRODUCTION
1.1 Product Description.
•
The fixture line is designed to operate LED light sources up to
115 watts.
•
This fixture must be serviced by trained electrical personnel.
•
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
1.2 Alternate Information Sources.
Holophane
Field Service Department
P.O. Box 3004
Newark, OH 43058-3004
(740) 349-4182
®
Pedestrian LED
Luminaire Series
ESPLANADE®
MEMPHIS
2 INSTALLATION
2.1 Tools and Materials Required.
TABLE 1. Installation Tools and Materials
DESCRIPTION
Flat blade screwdriver
Pendant Mount:
3/16" Allen wrench
Pipe Thread Sealant
3/8" Socket
Stem Mount:
1/8" Allen wrench
3/16" Allen wrench
1/4" Allen wrench
9/16" Socket
3/8" Socket
2.2 Fixture Installation.
2.2.1
Remove the mounting assembly from the electrical
housing by loosening the closure screw or latch and then swinging
the mounting assembly open on the mounting assembly hinge until
the hinge disengages. Disconnect the electrical connector from
the mounting assembly. See Figure 1.
2.2.2
Loosen the wire chamber cover screws and remove the
wiring chamber cover. Allow it to hang by the electrical wires
attached to the terminal block. See Figure 1.
Installation and
Maintenance
Manual
GR395, GR804A
USE
Terminal block connections
Setscrew
Mounting pipe threads
Closure screw (Esplanade only)
Setscrew
Setscrew
Setscrew
Nuts
Screws
IM-350