TomTom LINK 200 참조 매뉴얼 - 페이지 8
{카테고리_이름} TomTom LINK 200에 대한 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. TomTom LINK 200 11 페이지.
페이지 인쇄Diagnostics
Understading your LINK 200
In the following table the different LED modes are explained showing you working stages of your
LINK 200.
Green LED
OFF
FLASHING - 3
times short
FLASHING - 2
times short
FLASHING - 1 time
short
ON - 1 second
Troubleshooting
If your LINK 200 does not report trips To WEBFLEET properly anymore, the device may need to be
reset. For this please contact the TomTom Telematics Customer Support.
If you experience technical issues or have frequently asked questions, please go to the Customer
Support Portal on http://buisiness.tomtom.com/support/
Red LED
ON
ON - 3 seconds
ON - 3 seconds
ON - 3 seconds
ON - 3 seconds
LINK 200 is booting.
The LINK 200 boots for approximately 30 sec-
onds after you have connected it to the OBD-II
port of the vehicle before it starts establishing
mobile network and GPS reception.
Establishing mobile network and GPS reception.
Establishing mobile network reception.
GPS reception is established.
Establishing GPS reception.
Mobile network reception is established.
System is ready.
Mobile network and GPS reception established.
8