TomTom Navigator Navigator 3 사용자 설명서 - 페이지 9

{카테고리_이름} TomTom Navigator Navigator 3에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. TomTom Navigator Navigator 3 12 페이지. Wireless gps receiver
TomTom Navigator Navigator 3에 대해서도 마찬가지입니다: 사용자 설명서 (47 페이지), 사용자 설명서 (14 페이지), 빠른 시작 매뉴얼 (44 페이지)

페이지 인쇄

ignition). You can simultaneously power your PDA by using the supplied PDA Power

Cable. Never use the cigarette lighter adapter simultaneously with the AC adapter or the

permanent power cable.

3.3.3 Permanent power cable

A permanent power cable to directly connect the cradle to the vehicle power system is

supplied. We recommend hiring a professional service technician for installation into

your car. The permanent power cable is designed for 12V-24V. Never use the permanent

power cable simultaneously with the AC adapter or the cigarette lighter adapter.

3.3.3 Charging

While charging the 'Charge and GPS' indicator on the front of the receiver will turn red or

orange. When charging is completed, the red or orange indicator switches off.

3.3.4 Switching on and off

To switch the GPS receiver on, press the power button briefly. The 'Charge and GPS'

indicator will blink once. After that, the Bluetooth indicator will start flashing.

To switch the receiver off, press the power button for 3 seconds. The 'Charge and GPS'

indicator will blink once. If the GPS receiver needs charging, the 'Charge and GPS'

indicator will remain on. The Bluetooth indicator will switch off.

3.3.5 Setting up a connection with your PDA/Smartphone/Laptop

Please refer to the Bluetooth connection setup instructions in the documentation that

comes with your PDA, Smartphone or laptop. You will need to set up a Serial Port

connection between the GPS receiver and your device. The GPS receiver will appear to

your device as the "TomTom Wireless GPS" and its GPS signal will be output on its

"GPS serial output". To ensure ease of use, create a Bluetooth bond between your device

and the GPS receiver. The pairing code is 0000.

Please check specific device setup information on our support pages at

http://www.tomtom.com

3.3.6 Configuring your software

After setting up the Bluetooth connection, you will need to modify the properties of the

software on your PDA, Smartphone or laptop to use the GPS signal from the GPS

9/70