TomTom Runner & Multi-Sport 참조 매뉴얼 - 페이지 36

{카테고리_이름} TomTom Runner & Multi-Sport에 대한 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. TomTom Runner & Multi-Sport 44 페이지. Gps sports watch
TomTom Runner & Multi-Sport에 대해서도 마찬가지입니다: 참조 매뉴얼 (30 페이지), 참조 매뉴얼 (40 페이지)

페이지 인쇄

4. Attach the crankarm magnet to one of the crankarms on your bike. The magnet should face the

chainstay where you attached the chainstay sensor.

Tip: Make sure the different parts of the Cadence/Speed Sensor are lined up correctly on your

bike. The spoke magnet should pass the main body of the chainstay sensor and the crankarm

magnet should pass the tip of the sensor.

Once you have adjusted the sensors to the right position, tighten the cable ties so they are held

securely in place.

5. On your watch,

set the wheel size

sensor. The wheel size is the circumference of your tyre in millimetres (mm).

6. Move your bike or its crankarm so that at least one of the magnets passes the sensor. This

switches on the sensor.

7. From the clock screen, move down.

8. Select Sensors, then move right.

9. Select Bike, then move right to turn it on.

10. When you begin a workout, your watch connects to the sensor and you see an icon of a chainring

at the bottom of the screen.

When your watch is trying to connect to the Cadence/Speed Sensor, the chainring flashes.

The first time your watch tries to connect to your sensor, if it finds more than one sensor, your

watch doesn't know which sensor to connect to. Move to a place where there are no other sensors

within range of your watch.

to help increase the accuracy of the metrics provided by the