Epson LQ-630 여기에서 시작
{카테고리_이름} Epson LQ-630에 대한 여기에서 시작을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson LQ-630 2 페이지. 24-pin dot matrix printer
Epson LQ-630에 대해서도 마찬가지입니다: 사양 (2 페이지), 설정 매뉴얼 (2 페이지), 설정 매뉴얼 (2 페이지)
페이지 인쇄
Start Here
Unpacking
1
Remove all protective tape
Assembling the Printer
2
Attach the paper guide.
Open
Confirm the
(OFF)
power cord
It may come attached to the
printer in some countries.
The shape of the plug may vary
by location.
Caution:
c
Do not touch the white cable inside the printer.
Move the print head slightly to
the right.
Pull the paper bail
forward.
Pull the ribbon guide from
the cartridge.
ribbon guide
Hold the ribbon guide and slide the protruding
parts on both sides into the slots of the print
head until it clicks in place.
Close the paper bail and the printer cover.
Continued
Flip the paper bail
forward you.
Caution:
c
Insert the ribbon cartridge into the printer.
Do not tear off the clear film on the
ribbon guide. Doing so may cause
paper jams or printer malfunctions.
Press both sides of the cartridge firmly to fit
the plastic hooks into the printer slots.
Turn the ribbon-tightening knob to help feed
the ribbon into place; it should not be twisted or
creased.
Continued on back