Epson OP1 안전 및 설치 - 페이지 18

{카테고리_이름} Epson OP1에 대한 안전 및 설치을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson OP1 26 페이지. Operator panel
Epson OP1에 대해서도 마찬가지입니다: 매뉴얼 (44 페이지)

2. Installation

2.3 Installation

Applicable model: ST400-WP01

Even in environment that do not require drip-proofing, be sure to use the gasket

(accessory provided with OP1). Install the Operator Pendant on a flat, level surface

with the display facing down, and attach the gasket (provided) into the front

bevelled groove from the rear.

Precautions When Handling the Gasket

- Before you install the Operator Panel, make sure that the gasket is attached to the

Operator Panel.

- Gasket that is used for long periods of time or once has been installed on the

panel is scratched or dirty, and may not qualify IP65 dust-proofing and

drop-proofing performance. Replace the gasket periodically or when obvious

scratches or dirt is seen.

- Do not insert the seams of the gasket at the corners of the Operator Panel.

Inserting the seams of the gasket at the corners of the Operator Panel may cause a

tensile force to the seams and the gasket may be torn.

- To ensure stable dust-proof and drip-proof, attach the gasket so that its seams

come approximately 50 mm right or left to the middle of product bottom side.

Gasket

OP1 Safety and Installation Rev.3