DIHL KA-HB-800 사용자 설명서 - 페이지 5

{카테고리_이름} DIHL KA-HB-800에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DIHL KA-HB-800 7 페이지. Handheld blender

Operation Guide

Fitting and Removing Attachments

Unplug the motor unit from the mains power supply.

Take the attachment and push it onto the end of the handle, then turn it clockwise.

Removal is the reverse of fitting — with the mains power unplugged, turn the attachment anti-clockwise

and separate from the motor unit.

Operation

Fit your chosen attachment as described above, and plug the motor unit into the mains socket.

For low speed, hold the 'On' button. Release it to stop.

For high speed, hold the 'Turbo' button. Release to stop.

When mixing larger quantities and/or thicker liquids/solids, we suggest using low speeds.

When mixing smaller quantities and/or thinner liquids with fewer solids, we suggest higher speeds and

less mixing time.

Warning: Don't run the motor continuously for more than 3 minutes as it may overheat. After 3 minutes, switch

off for at least 3 minutes to recover. 1-minute runtimes with breaks of 1 minute are recommended.

You can use the blender wand to make mayonnaise, sauces, milkshakes, smoothies, baby food, and much

more. It's also great for puréeing soups.

We recommend that you use the supplied beaker for blending. If you wish to use another receptacle, ensure

it has a flat base and is tall enough to avoid splattering.

Fit the blender wand attachment as described in the Fitting and Removing Attachments section.

Put the ingredients in the beaker ensuring it is no more than half full.

Sit the beaker on a stable, flat work surface, and support it with your free hand.

Operate the blender as per the instructions in the earlier section. Up, down, and circular motions work

best for blending your ingredients thoroughly.

Warning:

Don't lift the beaker off the work surface while operating the blender.

When working with hot liquids, don't let the blade enter at an angle, as you might spray the contents

outside of the container.