Epson P6000 - Multimedia Photo Viewer 제품 지원 게시판 - 페이지 27
{카테고리_이름} Epson P6000 - Multimedia Photo Viewer에 대한 제품 지원 게시판을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson P6000 - Multimedia Photo Viewer 28 페이지. Surecolor p-series
Epson P6000 - Multimedia Photo Viewer에 대해서도 마찬가지입니다: 제품 지원 게시판 (17 페이지), 브로셔 및 사양 (6 페이지), 기본 작동 매뉴얼 (29 페이지), 사용 설명서 (46 페이지), 지침 (2 페이지)
페이지 인쇄
• AC adapter – must be plugged in to a wall socket and connected to the viewer before
the firmware update can be performed
Firmware Update Procedure:
Download the file epson12870.exe for Windows users or epson12871.dmg for Mac users
from the Epson website (www.epson.com). Follow the on-screen instructions to download and
extract the file onto your computer.
To verify the current firmware version on your viewer, power on the unit, select Settings from
the Home screen and press OK. Then select Device Information and use the 4 way ring to
select the Firmware Version menu. Press OK.
If you see an earlier version such as: 01.29.6838-0108-0107-0112 (P-6000) or
01.29.6838-0108-0107-0112 (P-7000) then proceed to the next section.
Steps:
1. Install a blank memory card into a memory card reader/writer and copy the
"PSV5FIRM" folder (including all the files in the folder) to the root directory of the
memory card.
2. Verify that the battery is installed in the P-6000 or P-7000 viewer.
3. Connect the AC adapter to the viewer, but do not power it on.
4. After the firmware file has been copied to the memory card, insert the CompactFlash or
SD memory card into the viewer.
5. Press and hold down the "OK" and
shown below.
When you see the firmware update screen (see reference image below), release the
OK and
keys.
firmware process again.
Note:
If you do not see this screen, power off the unit and start the
Page 2 of 3
PSB.2009.01.001
keys while sliding the "POWER" switch as