Epson P6000 - Multimedia Photo Viewer 사용 설명서 - 페이지 44
{카테고리_이름} Epson P6000 - Multimedia Photo Viewer에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson P6000 - Multimedia Photo Viewer 46 페이지. Surecolor p-series
Epson P6000 - Multimedia Photo Viewer에 대해서도 마찬가지입니다: 제품 지원 게시판 (17 페이지), 브로셔 및 사양 (6 페이지), 제품 지원 게시판 (28 페이지), 기본 작동 매뉴얼 (29 페이지), 지침 (2 페이지)
페이지 인쇄
Click
.
Firmware
3.
Click
.
Download
4.
Double-click the firmware file that you downloaded.
5.
Note: Make sure your printer is turned on and connected to your computer or network before you run the
firmware file.
Follow the on-screen instructions to install the new firmware on your printer.
6.
Caution: Don't turn off the printer while the firmware is updating. The printer automatically turns off when
the firmware update is complete.
If you connected to your printer through a network, follow the instructions in the next section to
configure the printer for your network.
Configuring the printer for your network
Once the printer is connected to your network, follow these steps to configure it:
Turn on the printer.
1.
Start EpsonNet Config.
2.
EpsonNet Config searches for all Epson printers on the network and displays the MAC address for
each printer that it finds.
Highlight the printer you want to configure and click
3.
screen.
If necessary, contact your network administrator for instructions on assigning an appropriate IP
4.
address. A static IP address is recommended.
Configuring the printer for your network
Configuration
to access the TCP/IP selection
|
43