DIHS Optima W R2 Plus 빠른 시작 매뉴얼 - 페이지 4

{카테고리_이름} DIHS Optima W R2 Plus에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DIHS Optima W R2 Plus 7 페이지.

페이지 인쇄

I. Code Pairing with TC-25, TC-30, TC-35 or TC-40.

1) Long press the code pairing button on the receiver until LED 1 is flickering quickly.

2) Turn off thermostat, and long press SET button until the code shows on the top left corner of screen,

then press + button, the left corner battery icon start flashing.

3) Wait for a while, when LED 1 on TC05/TC06 stop flickering, indicating successful code pairing.

II. Code Pairing with App

1) Scan the QR code, and download "Smart Life" APP from google play or app store

2) Install app and register account

3) Add device by press + button at top right corner

4) Press " Home Appliances II"

5) Find " Thermostat or Heater" on the list and press

6) Long press Pairing button on receiver till the LED 1 will flash quickly.

7) Press "Confirm indicator rapidly blink" on phone.

8) After a while, when the LED 1 on receiver stop flashing, indicating successful Wifi connection.

If the LED still flash slowly, the connection fail, please try again from step. 5.

III. Signal Lost

In case the RF and WIFI signal lost/disconnected, LED 1 will flash slowly.

Parameter Setting

Turn thermostat off, press and hold SET button and + button for 6s to enter parameter setting. Each

press of SET button will go to next item setting. Adjust the value by pressing + or – button.

Description

Temp. calibration for internal sensor

Set Point Max.

Set Point Min.

Sensor Select

Frost Protection Temp.

Floor Temp. Display

High temp protection

Dead zone

Display

Child Lock

OPTIMA W R2 PLUS THERMOSTAT

Optima W PLUS is a development of DIHS BV, NETHERLANDS. www.dihsbv.nl

Range

-8 ℃ ~8 ℃

5 ℃ ~35℃

0: Internal sensor

1: External sensor

2:Internal

External

sensor

5 ℃ ~15℃

Read Only

30°C ~ 80°C

0~3℃

0: Room temp.

1: SET temp.

0: Disable

1: Enable

Default Value

0℃

35 ℃

5 ℃

32 ℃

0℃