Epson R1400 조립 지침 매뉴얼 - 페이지 12

{카테고리_이름} Epson R1400에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson R1400 21 페이지. Eco-flo continuous ink system

Step 11 Install Injectors

Please place the set of 6 injectors in the printer carriage that is now parked in the centre of the printer.

Carefully align them, and when you are happy the injectors are in position. PLEASE BE CAREFUL NOT TO PUSH

TOO HARD, AS THIS WILL CAUSE DAMAGE TO THE INJECTOR & PRINTER HEAD. Push the injectors home

until you feel a positive seated position, see Fig.28 below. When all are in, they should look like Fig.29 below.

Fig.28

Step 12 Fixing the Special Printer Lid

Attach the special printer lid that has been supplied making sure that none of the tubing catches or squashes

between the lid and housing, as this will stop any ink flowing into the printer heads. At this stage you MUST align the

tubes in the correct manner as illustrated in Fig.30. Align & position the special lid as indicated in Fig.31.

Fig.30

Picture shows injectors fully installed in a

Fig.29

R1400

Fig.31