Removing and Installing Ink Cartridges
Be sure you have a new ink cartridge before you begin. Once
you start the ink cartridge replacement procedure, you must
complete all the steps in one session.
1. Make sure the printer is turned on and not printing, then
open the printer cover.
2. Do one of the following:
If the red b error light is on (cartridge is empty), press
the b maintenance button.
If the red b error light is flashing (cartridge is low),
press the b maintenance button. You see
highlighted in the Advanced Settings
Replacement
menu. Press
.
OK
b
If the
error light is off, press the
choose
More Options
button to select
3. When you see a message on the display telling you that ink
cartridge replacement will begin, press
moves to the replacement position.
4. Open the cartridge cover.
5. Press in the tab on the back of the cartridge and lift the
cartridge out of the printer. Dispose of it carefully.
Warning: Keep ink cartridges out of the reach of children and do
not drink the ink.
If ink gets on your hands, wash them thoroughly with soap and
water. If ink gets in your eyes, flush them thoroughly with
water.
Ink Cartridge
button to
, then press
. Press the
OK
Ink Cartridge Replacement
. The print head
OK
6. Unwrap the new ink cartridge.
Caution: Don't touch the green circuit board or remove any
labels.
7. Lower the cartridge into the holder, with the green circuit
board facing the front. Then gently push the cartridge down
until it clicks into place.
.
8. If you need to replace another ink cartridge, repeat steps 5
through 7 before continuing with step 9.
9. Close the ink cartridge cover.
10. Press
OK
The printer begins charging the ink delivery system.
11. When you see a message that charging is complete (after
about a minute), press
7/04
Epson Stylus Photo R320
and close the printer cover.
to finish.
OK
Epson Stylus Photo R320
9
-