Argos Sainbury's 956/4657 조립 지침 매뉴얼 - 페이지 7

{카테고리_이름} Argos Sainbury's 956/4657에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Argos Sainbury's 956/4657 9 페이지. Charcoal bbq with built-in fan

Assembly Instructions

As this item is packed in assembled status. Thus, there is no necessary for users

to assemble.

Preparation

Open the battery cover (9) with a Philips screwdriver and insert 4 x 1.5 V AA

batteries(Do not provided with this product) into the battery case (8). Check that

the batteries are correctly fitted. Replace the battery cover and fix it with a Philips

screwdriver.

If the batteries run out during use, you can connect a power bank via the

connector (11) and so continue barbecuing.

Use

1. Place the inner bowl(6) into the outer bowl(7).

2. Fill the charcoal container(4) completely with charcoal.Put cover(3) on charcoal

container(4).

3. Apply a circular layer of lighter gel on ignition plate(5), approx. 10 mm (0.4

inches) wide.

4. Place ignition plate(5) into inner bowl(6).

5. Turn on the Switch(10) on side of battery case(8).Turn it clockwise to maximum

position.

6. Using a safety lighter, light gel until it burns.

7. Put the cover(3) on the filled charcoal container(4) and place container on

ignition plate(5). Within a short period of time, the charcoal should start

glowing.