Epson RX620 - Stylus Photo Color Inkjet 기본 작동 매뉴얼 - 페이지 21
{카테고리_이름} Epson RX620 - Stylus Photo Color Inkjet에 대한 기본 작동 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson RX620 - Stylus Photo Color Inkjet 45 페이지. Epson scan icm updater v1.20 (psb.2008.07.001)
Epson RX620 - Stylus Photo Color Inkjet에 대해서도 마찬가지입니다: 사양 (2 페이지), 여기에서 시작하기 매뉴얼 (8 페이지), 업데이트 (1 페이지), 제품 정보 매뉴얼 (19 페이지), 사용 설명서 (4 페이지)
페이지 인쇄
35 mm slides
1 Place the film holder on the document table with
the side where the slides will be placed facing
toward you.
2 Set the slides into the film holder with the base side
facing down. The base side of the film is the side
where the film maker's name and film ID numbers
can be read correctly.
Note:
❏ There is a possibility that a film may not be
readable due to the difference of the pitch width
within 6 frames.
❏ Do not press the glass of the document table with
too much force.
4.
Close the document cover completely.
Note:
❏ A newton ring (ring-shaped stripes pattern) may
appear in the scanned image. To remove the newton
ring, set the film with the base side facing up. See the
Reference Guide for detail.
❏ When you are not using the film holder, you can store
it inside the document cover. See "Storing the Film
Holder" on page 23 for details.
Top
Bottom
Printing Basics
You can print photos to 10 × 15 cm (4 × 6 in) paper
without altering any settings.
1.
Load and set film on the document table.
Press the Film button.
2.
3.
Select Basic Print.
4.
Select the film type.
& See "Selecting the Film Type" on page 23
5.
Select the desired photo and set the number of
prints.
1
6.
Load appropriate paper.
& See "Loading Paper" on page 5
7.
Press the x Color or x B&W button to start
printing.
Printing from Film
Cancel
OK
1. Select
the desired
2
photo.
2. Set the
number of
prints.
Cancel
OK
21