Argos Opti 조립 및 사용자 지침 - 페이지 7
{카테고리_이름} Argos Opti에 대한 조립 및 사용자 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Argos Opti 20 페이지. Pro fitness dumbbell bench
Argos Opti에 대해서도 마찬가지입니다: 빠른 조립 (2 페이지), 조립 및 사용자 지침 (19 페이지), 조립 및 사용자 지침 (20 페이지)
페이지 인쇄
Assembly Instructions
Step 2
Remove the 3 x M8 Saddle
Washers (16) and 3 x M8
Saddle Nut (17) from the
Saddle (5).
Step 3
Connect the Handlebar (1) to
the Main frame (19) using
2 x M8 x 35mm Allen Bolts (11),
2 x M8 Spring Washer (15) and
2 x M8 Curved Washer (12).
Attatch the Holder of monitor (9)
on the Handlebar (1).
Tighten the opening of the
Holder (9) with one one Screw (10).
Slide the Exercise Monitor (4)
onto the Holder (9).
Fit the Saddle (5) to the Saddle
Stem Insert (2) refitting the
Washers (16) and Nuts (17)
previously removed. Attach the
Adjuster Knob (8) into the
saddle support before you slide
the Saddle Stem Insert (2) into
the Main Frame.
Connect the Sensor Wire
(20) together and fit the
Pulse Wire (18) into the rear of
the Exercise Monitor (4).
Set the Saddle to the desired
height, allowing for a slight
bend in the knee at the bottom
of the pedal rotation.
Re-tighten the Adjuster Knob
(8) .
WARNING! Heart rate
monitoring systems may be
inaccurate.
Over exercise may result in
serious injury or death.
If you feel faint stop exercising
immediately.
6