Crow FW2-SIREN2EXT-8/9F 설치 매뉴얼 - 페이지 18
{카테고리_이름} Crow FW2-SIREN2EXT-8/9F에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Crow FW2-SIREN2EXT-8/9F 19 페이지. Siren system
페이지 인쇄
- User Guide
Specification: Siren Unit
FW2-Siren Specification (External Unit)
Sound Pressure Level
Siren Tone
Frequency Range
Flash Light
Power Supply Voltage
Current consumption
Power Supply current limitation
Maximum Power
Siren Alarm Period
Low Battery Level
Low Battery Indication
Arm/Disarm Indication
Supervision
Tamper Switch
Battery Life
Material
Dimensions of unit
Weight (Without Battery)
Operating temperature range
Case Protection Level
Value
More than 102dB
Yelp
2700 ±500 Hz
Power LED (90 Lumens)
9V÷15V DC or Battery 3.6V /14Ah Lithium or both.
Standby: 110uA ±10uA@ Battery operation
20mA±2mA@12V DC operation..
Alarm: Average: 950mA @ Battery operation.
Max: 1.8A peak@ Battery operation.
Average: 200mA @ 12V DC operation.
Max: 1.2A peak @ 12V DC operation.
Up to 1.8A
Average :4W , Max peak:17W
2 min/15 min (According the status of Jumper D)
2.8V
LED Flash @ Arm/Disarm
(According the status of Jumper B&C)
LED Flash : Arm-1 Disarm-3
LED Flash with Beeps : Arm-1 Disarm-3
(According the status of Jumper B&C)
Sync signal every 1 min.
Normally Closed.
After power up the Tamper will activate only after
the second opening and then Activate the Piezo
for 2 min or till reset by the C.P.
> 4 Years (Based on 2 min Piezo operation/month)
External Box: P.C. (3mm thick).
317mm x 209mm x 62mm
1.2 Kg
o
o
-30
C to +70
C
IP 43
Plastic PC with UV protection
Conformal coated circuit board
16