Argos VC-301 사용 설명서 - 페이지 10
{카테고리_이름} Argos VC-301에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Argos VC-301 16 페이지. Value series compact bagless cylinder vacuum cleaner
페이지 인쇄
VC-303 Guide (amend Jan 2010).qxd:Value
TROUBLESHOOTING
PROBLEM
There is an accessory
missing
The vacuum cleaner
does not switch on
The vacuum cleaner won't
pick up
Dust is escaping from the
vacuum cleaner
Accessories wont pick up
dust/debris
The blockage indicator (if
applicable to model)
activates
8
22/1/10
POSSIBLE CAUSES
1. A part(s) is missing from box
1. The unit is not plugged into a mains socket
2. The power button on the unit has not been
depressed
3. The thermal motor cut out has been activated
4. There is no electricity to the power socket
1. The accessories are not correctly fitted.
2 There are blockages in the hose/accessory
3. The dirt container/dust bag is full
4. The filters are blocked/clogged
1. The filters/dust bag/dirt container are not
fitted correctly
2. The filters/dust bag are damaged
1. The wrong tool is fitted for the task
2. The tools are blocked
3. The filters are blocked
4. The dirt container/dust bag is full
5. The hose/tubes are blocked
1. The filters/dust bag/dirt container are blocked
2. The dust bag/dirt container is full
3. The accessories/hose/tube are blocked
For help, spares or assistance please call 0845 6042377
or visit www.bagsandfilters.com
11:40
Page 10
SOLUTIONS
1. Check the 'KNOW YOUR MACHINE' page
of your instructions
1. Ensure the plug is firmly in socket and
switched on
2. Depress the power switch on the unit
3 If the unit has cut out during use, disconnect
the unit from the wall socket, allow to cool for
one hour, clean the filters, empty bin/dust bag
and check the hose/accessories for blockages
4. Seek expert help from a qualified electrician
1. Check hose and tools are correctly attached
to the machine/hose/tube; refer to 'OPERATION'
section of your instructions
2. Check the air paths of the hose/accessory are
not obstructed by blockages
3. Check dirt container/dust bag and if necessary
empty/replace
4. Frequent cleaning of filters will maintain
performance; see 'MAINTENANCE' section of
your instructions
1. See ' A SSEMBLY' and 'MAINTENANCE' sections.
2. If the filters/dust bag are damaged these will
need to be replaced
1. See 'KNOW YOUR MACHINE' section.
2. Check the air paths of the tools are not
obstructed by blockages
3. Frequently cleaning filters will maintain
performance; check 'MAINTENANCE' section
4. Check and empty the dirt container/replace
dust bag
5. Check the air paths of the hose/tubes are not
obstructed by blockages
1. Frequently cleaning filters will maintain
performance; check 'MAINTENANCE' section
2. Check and empty dirt container/replace dust
bag
3. Check the air paths of the accessories/hose/
tubes are not obstructed by blockages