Epson Spectroproofer 설정 및 유지 관리 - 페이지 12

{카테고리_이름} Epson Spectroproofer에 대한 설정 및 유지 관리을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson Spectroproofer 36 페이지.
Epson Spectroproofer에 대해서도 마찬가지입니다: 문제 해결 매뉴얼 (2 페이지)

페이지 인쇄

Setting Up the SpectroProofer

Warning:

Make sure the printer and

the SpectroProofer are

unplugged from the AC

outlet before connecting

the SpectroProofer cables.

Note:

To install the SpectroProofer,

you must disconnect the

Auto Take-up Reel from the

option port on the back of

the printer.

Connecting the Cables

The 44" SpectroProofer has a secondary USB port that can be used to

connect the optional Auto Take-up Reel (available for the Epson SureColor

P8000/P9000 only). The 24" SpectroProofer does not have this port.

1. Open the cover on the right side of the SpectroProofer.

2. Plug the USB-B end of the included SpectroProofer USB cable into the

square port marked with the

Auto Take-up Reel

SpectroProofer

If you've also installed the optional Auto Take-up Reel, plug its

USB cable into the flat port marked with the

(44" model only).

printer symbol.

take-up reel symbol