Argos VCB43B12M 사용 설명서 - 페이지 9

{카테고리_이름} Argos VCB43B12M에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Argos VCB43B12M 14 페이지. Bagged large cylinder vacuum cleaner

Maintenance

The dust bag and the motor filter play a very important roll in the efficiency of

the vacuum cleaner. The purpose of the dust bag is to capture dirt, but at the

same time the filter needs to be clear enough to allow air to pass through. If

the bag or motor filter get clogged, no air can pass through the cleaner and

no cleaning can take place regardless of how powerful the unit is.

To keep the cleaner operating at maximum efficiency, change the dust bag

frequently and clean the filter when needed. Some fine particles can restrict

the air flow very quickly and will decrease the performance even before the

bag appears to be full. For that reason, the bag and filter may need to be

changed more often when vacuuming carpet fresheners or cleaners,

powder, plaster dust or similar fine substances.

When the 'Dust Bag Full' indicator goes red the dust bag must be emptied to

avoid damage to the cleaner.

Empty the dust bag at regular intervals to prevent clogging, which carries a

risk of loss of suction power and poor cleaning performance.

Be sure to turn off and unplug the

vacuum cleaner before replacing the

dust bag or cleaning the filter. Never

vacuum without the dust bag or filter

in place.

1. Turn off and unplug the vacuum

cleaner.

2. Remove the hose from the hose

connection and open the dust bag

compartment by pushing the handle

upwards and lifting the lid.

3. Slide the dust bag out of the frame

and remove the dust bag from the

dust bag compartment.